SATO S84NX - Checking and Adjusting the I-Mark Sensor and Gap Sensor

S84NX/S86NX Service Manual
46
Back to top 3 Checking and Performing Printer Adjustments
3.3.3 Checking and Adjusting the I-mark Sensor
and Gap Sensor
2 min
Y
Auto-calibration
1
Select [Printing]
>
[Advanced]
>
[Calibrate]
>
[Auto-calibration]
>
[Gap+I-Mark].
2
Remove the labels from the liner and place the liner so that the I-mark does not cover the
sensor window.
Sensor Windows