SATO S84NX - Factory Pitch

Back to top 2 Operation and Confi guration
S84NX/S86NX Service Manual
34
2.3.9 Factory Pitch
Select [Tools]
>
[Service]
>
[Factory Pitch].
To shift the print position in the vertical direction.
Set the print position “+” to move the position in the direction opposite to the media feed direction and
value “–” to move the position in the media feed direction.
Setting range: –99 to 99 dots (Default: 0 dots)
Media feed
direction
ABC
Adjustment of “–” value
(–99 dots)
Adjustment of “+” value
(+99 dots)
No adjustment (0 dots)
Note
• The actual off set of the print position in the vertical direction is the sum of the off set value and the
print position off set value set in Service menu.
• When you change the value in the Service menu, the value set at factory shipment also changes.