SATO S84NX - Removing the Front Housing Cover

Back to top 4 Replacement
S84NX/S86NX Service Manual
68
4.2.2 Removing the Front Housing Cover
1
Open the top cover (
1
) of the product.
NOTE
• Open the top cover fully to prevent accidental drop
of the cover.
1
2
Remove three screws (S7) and remove the USB unit (
2
).
S7
2
Notes on assembling
• Attach the USB unit so that the
SENSOR SW BR cable
(
3
) is
not pinched.
3
3
Disconnect the SENSOR SW BR cable connector (
4
).
4