SATO S84NX - About [Service Mode]

Back to top 2 Operation and Confi guration
S84NX/S86NX Service Manual
21
2. 3 About [Service Mode]
2.3.1 Logging in Service Menu
CAUTION
You need to enter the password to access the [Service] menu. Since the serial number of the PCB
is used as the password, the password is diff erent for each product.
CAUTION
The [Service] menu is only for SATO authorized service personnel use.
1
Print the factory settings.
Refer to
3.1.3 Checking Printing with Factory Settings
2
Enter the characters with "+ service" added to the PCB serial number (8 digits) on the printed label.
If the serial number shown above is printed: ABCD0123 + service