SATO S84NX - Page 22

Back to top 2 Operation and Confi guration
S84NX/S86NX Service Manual
20
5
Printing Mode
Select the operation mode.
[Use Ribbon] Prints using a ribbon.
[Direct Thermal] Select this when using media with I-marks.
6
Video playback selection
Check video [
] (Enter key)
End video [
] (Right select button)
7
Sensor Type
[Gap] Select this when using media with gaps.
[I-Mark] Select this when using media with I-marks.
8
Load Paper
Check video [
] (Enter key)
End video [
] (Right select button)
9
Selection whether to show the startup guide at the next startup.
Does not show the startup guide. [
] (Right select button)
Shows the startup guide. [
] (Left select button)