SATO S84NX - Position Check

Back to top 2 Operation and Confi guration
S84NX/S86NX Service Manual
32
2.3.7 Position Check
Select [Tools] > [Service] > [Position Check].
After turning on the printer or closing the print head, the printer measures the media pitch size printed
on the second label, and compare it with the subsequent media pitch sizes to detect the printing
position deviation. When a print position deviation exceeding the setting range is detected, “Media
Error” is displayed.
Enable checkbox
Enable or disable the position check.
(Default: disabled)
Disabled: Disables the detection of the position check.
Enabled: Enables the detection of the position check.
+ Check Value
Set the allowable off set range in the direction opposite to the media feed
direction.
– Check Value Set the allowable off set range in the media feed direction.
Setting range: –60 to 60 dots (Default: 0 dots)
Media feed
direction
ABC
Adjustment of “–” value
(–60 dots)
Adjustment of “+” value
(+60 dots)
No adjustment (0 dots)