SATO S84NX - Replacing the Timing Belt of Ribbon Unwind Mechanism

Back to top 4 Replacement
S84NX/S86NX Service Manual
110
4.7.3 Replacing the Timing Belt of Ribbon Unwind
Mechanism
Procedure Reference
1
Open the front housing cover of the product.
Refer to 4.2.2
2
Open the rear housing covers of the product.
Refer to 4.2.1
3
Remove the gearbox from the product.
Refer to 4.4.8
4
Remove the print head from the product.
Refer to 4.3.1
Step 1
Step 2
Step 3
Step 4
5
On the front of the product, remove two screws
(S3) and the belt cover (
1
).
S3
S3
1