SATO S84NX - Operator Panel (KB) PCB Replacement

Back to top 4 Replacement
S84NX/S86NX Service Manual
111
6
On the rear of the product, remove three screws (S4).
7
Then carefully remove the frame of the print head assembly (
2
).
S4
S4 S4
2
8
On the head lock lever (
3
), remove the hex
socket set screw (S14) using an Allen wrench.
Then remove the screw (S13) and remove the
head lock lever (
3
).
S14
3
S13
9
Remove three screws (S3) and remove the Side plate (
4
) and UW Ribbon Roller (
5
).
S3
5
4
10
Replace the timing belt (
6
).
6