SATO S84NX - Removing the Housing Cover

Back to top 4 Replacement
S84NX/S86NX Service Manual
57
4. 2 Removing the Housing Cover
4.2.1 Opening the Rear Housing Cover
1
Loosen and remove two fl at-head screws (S1)
at the top of the rear cover, then remove another
two pan head screws (S2) at the rear.
S1
S2
S2
S1
2
Open the interface side of the rear housing cover (
1
), then open the other side that has a
fl ap on the rear housing cover (
2
).
1
2
Flap