Back to top 2 Operation and Confi guration
S84NX/S86NX Service Manual
25
Inventory Timeout
Set the timeout period of the inventory check. Shows
only if you have installed the UHF RFID module.
The options are as follows:
• 25 ms
• 50 ms
• 75 ms
• 100 ms
• 150 ms
• 200 ms
• 300 ms
• 500 ms
Verify
Enable or disable the verifi cation of data written on
tag. The options are as follows:
• Enabled: Perform the verifi cation by reading
the data of the written tag.
If not match, the product prints
VERIFY TAG ERR on the label.
• Disabled: Do not perform the verifi cation of the
written tag.
To Next Page
Loading...