SATO S84NX - Page 108

Back to top 4 Replacement
S84NX/S86NX Service Manual
106
5
Loosen the screw (
5
) of the tension bracket B.
NOTE
• Do not remove the screws.
6
On the gear side of the gearbox, remove the e-ring (
6
) using a slotted screwdriver.
Then remove the gear (
7
) and timing belt (
8
).
7
8
5
6
7
Loosen the screw (
9
) of the tension bracket A.
NOTE
• Do not remove the screws.
8
On the gear side of the gearbox, remove the timing belt (
bk
).
10
9