Back to top 2 Operation and Confi guration
S84NX/S86NX Service Manual
28
Wi-Fi Roam Adjust
Adjust the threshold level for low RSSI roaming of
the wireless LAN.
Shows only if you have installed the optional wireless
LAN.
The setting items are as follows:
Enable
Enable or disable the Wi-Fi roaming adjustment.
The options are as follows:
•
Enabled
: Enable the Wi-Fi roaming adjustment.
•
Disabled
: Do not enable the Wi-Fi roaming adjustment.
* The setting will be eff ective after you power on the product again.
* Wi-Fi Direct will be disabled if this adjustment is enabled. (only if the wireless
LAN module is W-LAN)
Roam Threshold
Set the RSSI roaming threshold level.
The setting range is from -95 to -40 dBm.
NOTE
• A higher value will make the product roam more often while a lower value
will make the product more reluctant to roam.
• The roaming is disabled if set to -95 dBm but the product will change AP if
the current AP is out of range or powered off .
Supplicant Timeout
Set a period of time for the EAP authentication
timeout.
Shows only if you have installed the optional wireless
LAN.
The options are as follows:
• 5 sec
• 30 sec
To Next Page
Loading...