SATO S84NX - Page 122

Back to top 5 Installation of Options
S84NX/S86NX Service Manual
120
3
Disconnect the motor cable (
3
).
4
Remove three screws (S15) and remove the gearbox (
4
).
Ground wire
S15
S15
S15
3
4
5
Open the top cover (
5
) of the product.
6
Loosen the HEAD CABLE COVER thumb screw (
6
) and remove the HEAD CABLE COVER.
7
Turn the head lock lever (
7
) clockwise to unlock the print head.
5
6
7
8
Remove the print head (
8
).
Refer to
4.4.8 Replacing the Print Head
Unplug the connector in the order of a and b.
8
a
b