SATO S84NX - Page 126

Back to top 5 Installation of Options
S84NX/S86NX Service Manual
124
17
Installing the UHF FRONT ASSY (
bt
)
19
(1)
Attach the UHF FRONT ASSY to the print head and fi x it using two screws.
LH type RH type
Align the RFID HEAD COVER SHEET (
ck
) with
the print head end face (a).
Shift the RFID HEAD COVER SHEET (
ck
) all
the way to the end. (b)
* RFID HEAD COVER SHEET sticks out from the
print head end face (a).
20
a
4.0 to 5.0 mm
c
Screws
20
a
Screws
4.0 to 5.0 mm
c
b
Notes on assembling
• Make sure that the protruding part of the cable (c) is 4.0 to 5.0 mm from the end face of the print
head.
18
Pass the coaxial cable of the UHF FRONT ASSY through the print head assembly.
Notes on assembling
• Pass the coaxial cable between the two print head connectors.