S84NX/S86NX Service Manual
146
Back to top 6 Troubleshooting
USB Memory Status
Icon Description
USB memory is connected.
Barcode Checker Status
Icon Description
Barcode checker is connected.
Barcode Scanner Status
Icon Description
Barcode scanner is connected in AEP mode.
Print Job Status
Icon Description
Ribbon is near the end. The rest of the ribbon is decreased. Prepare a new ribbon.
Label is near the end. The rest of the media is decreased. Prepare new media.
Command error detected. Check the print data.
Receive buff er is nearly full. Stop sending print data until the buff er is no longer
nearly full.
Defective print head is detected. Replace the print head.
Incompatible print head is detected. Replace the print head.
To Next Page
Loading...