SATO S84NX - Page 4

Back to top Table of Contents
S84NX/S86NX Service Manual
2
3
Checking and Performing Printer Adjustments .....36
3. 1 Checking Before Starting Work ...................................................38
3.1.1 Checking Printing with Actual User Data ............................................ 38
3.1.2 Checking Installation Environment and Printer Conditions ................. 38
3.1.3 Checking Printing with Factory Settings ............................................. 39
3.1.4 Disabling the SOS Connection ........................................................... 41
3. 2 Checking and Cleaning ................................................................42
3.2.1 Checking and Cleaning the Exterior ................................................... 43
3.2.2 Blowing Air on the PCBs ..................................................................... 43
3. 3 Checks and Adjustments .............................................................44
3.3.1 Checking for Cover Open and Head Open Errors .............................. 44
3.3.2 Checking the Ribbon End Function .................................................... 45
3.3.3 Checking and Adjusting the I-mark Sensor and Gap Sensor ............. 46
3.3.4 Printing Quality .................................................................................... 50
3.3.5 Meandering ......................................................................................... 51
3.3.6 Checking and Adjusting the Print Position .......................................... 51
3.3.7 Checking the Stop Position ................................................................. 51
3. 4 Final Check ....................................................................................52
3.4.1 Checking Test Print with Factory Settings .......................................... 52
3.4.2 Checking the Customer’s Layout ........................................................ 52
3.4.3 Checking Barcode Scan ..................................................................... 52
3.4.4 Checking SOS Connection ................................................................. 53
3.4.5 Returning to the Original State ............................................................ 53