SATO S84NX - Page 91

Back to top 4 Replacement
S84NX/S86NX Service Manual
89
9
Remove two screws (S16) attaching the sensor bracket (
bl
) to the center frame.
Be careful not to pull the
attached sensor cable
(
bm
).
11
12
10
Turn the sensor bracket (
bl
) to change its direction.
Be careful not to pull the
attached sensor cable
(
bm
).
12
11
█ BOTTOM MEDIA SENSOR PCB
11
Remove two screws (S18) and remove the BOTTOM MEDIA SENSOR PCB (
bn
).
12
Disconnect one connector.
Connector
S18
S18
13