SBC PCD1.Room - Page 43

Hardware Manual PCD1.M2110R1 │ Document 27-619 │ Version ENG 04 │ 2018-08-20
Saia-Burgess Controls AG
Program Download and Backup
CPU / Control Process Unit
3-20
3
Backuptoashmemorymodules
For the use of “backup/restore” on the internal FLASH, a folder name PCD_
BACKUP must be created.
BackuptoM1ash
Please note that the M1
ashmustbedeleted
beforehand.
When using use of the
backup function to M1
modules,nootherles
should be written to the
module.
M1 FLASH
PCD_BACKUP
*.sbak
PCD1 #1
PCD1 #2
Please note that a 512 kByte user program and 128 kByte RAM DB/text will
generatealeofapproximatelythesamesize.
Limitations:
Filesgeneratedcannotbecopieddirectlyfromonefoldertoanother!Theseles
may not be deleted from the original folder or renamed. If they are, the restore
function will no longer work correctly in this case!
The following window will
appear.
Click OK to start
the backup process.