Visibility conditions when operating
• Operate in daylight or with lights that gives at least 50 yards clear visibility.
• Be able to see and identify passersby, steep slopes, ditches, drop-offs, overhead obstructions, power
lines, debris and foreign objects.
• Use extreme care when backing up, vision may be limited, severe damage or injury can occur.
• Do not run engines in enclosed building without adequate exhaust ventilation.
Mounting and dismounting truck or equipment:
• Only mount or dismount when truck and moving parts are stopped.
• Always use three point contact when climbing on or dismounting.
• Walkways, steps, and handrails should be checked before use to ensure a proper non-slip surface.
Replace or repair damaged component immediately.
• Always engage parking brake when exiting the truck.
Hot surface
• Stay clear of hot surfaces such as mufflers, hydraulic pumps, valves and tanks.
• Relieve pressure from tank, reservoirs, valve and hoses before servicing or opening.
Safety Signs:
• Replace missing, damaged or unreadable safety signs immediately.
Equipment guards
• Never operate equipment if machine guards are damaged or missing.
• Replace missing or damaged guards immediately
.
Riding Passengers:
• Never allow passengers whose presence distracts from safe operation or transporting implement.
• If passengers presence is needed, passenger must be seated securely and belted in passenger seat.
• DO NOT allow passenger in any other location of implement during operation or transport.
Communication:
• Verbal communication can be difficult and dangerous near implement.
• Operation instructions and directions should be made prior to starting implement
• If communication is necessary completely shutdown and exit implement.
• Never allow anyone to approach implement during operation or transport.
PN SW-GHP-01
To Next Page
Loading...