Schwarze Industries Hypervac - Standard Presets

Section 4 - Operations
HV-18 revised 11/18 SCHWARZE HYPERVAC 49
4.4 Standard Presets
Your Hypervac comes preset to the following settings:
Preset Sweep
Sense
Switch
Aux
Engine
Speed
LEFT
GB
SPD
RIGHT
GB
SPD
LEFT
GEO
EXTN
RIGHT
GEO
EXTN
CNTR
BRM
SPD
GB H
2
0 NZL
H
2
0
HPR
H
2
0
RH
HEAD
LH
HEAD
LEAF
DR
1
Left
Light
1500
RPM
ON
25%
OFF 85% NA ON
20%
ON ON ON UP DOWN DOWN
2
Left
Medium
1800
RPM
ON
20%
OFF 85% NA ON
16%
ON ON ON UP DOWN DOWN
3
Left
Heavy
2200
RPM
ON
17%
OFF 85% NA ON
12%
ON ON OFF UP DOWN DOWN
4
Right
Light
1500
RPM
OFF ON
25%
NA 85% ON
20%
ON ON ON DOWN UP DOWN
5
Right
Medium
1800
RPM
OFF ON
20%
NA 85% ON
16%
ON ON ON DOWN UP DOWN
6
Right
Heavy
2200
RPM
OFF ON
17%
NA 85% ON
12%
ON ON OFF DOWN UP DOWN
Note: 50% Gutter broom down pressure is preset for all sweep switches.
Note: Beacon and hazard lights are preset to ON for all sweep switches.
Note: The Light, Medium, and Heavy sweep switch settings are preset at the factory. After the pre-set is selected,
settings may be adjusted using the on-screen controls and/or the switch banks. When the sweeper is turned off, the pre-
sets will default back to their pre-set positions.
Note: Presets may also be custom tailored to your individual needs. See your supervisor or contact your dealer regarding
changing your presets.