Section 1 - Safety
HV-18 revised 11/18 SCHWARZE HYPERVAC 29
In-Cab
# Part # Description QTY Visual
1 22529 CAUTION - Before Unloading 1
2 22530 WARNING - Sweeping Speed 1
3 23182 WARNING - Read Manual 1
4 22825 IMPORTANT - Air Bleeder 2
5 29154 WARNING - Clearing
Obstructions
1
6 29410 IMPORTANT - Daily
Inspection Point
1
7 29636 WARNING - Spanish
Translation
1
PELIGRO
29636
Si no lee Ingles, pida
ayuda a alguien que
si lo lea para que le
traduzca las medidas
de seguridad.
05/21/04
SCALE:
Customer
ORIG. DATE REV. DATE
REV. # REV. DESC.
DECAL SIZE: CORNER RADIUS:
COLOR(S):
ARTIST:
A
100%
SCHWARZE
SCHIN029636
First Proof
4 X 3.625
2
EOJA
CSR
NOTE: Colors shown on this proof are
only approximate. When the job is
printed, ink colors will be matched to
Dashed line represents diecut
& DOES NOT PRINT
JOB# 21528
FIRST PROOF: 05/21/04
PROOF APPROVAL
PLEASE PROOFREAD CAREFULLY.
CHECK ONE:
OK AS IS
OK WITH CHANGES
Please mark any changes on above proof.
PROOFED BY_________________
DATE_________________________
PART#
BLACK
RED
8 29637 WARNING - Remove Engine
Keys
2
WARNING
Remove engine keys
before performing
maintenance.
29637
05/21/04
SCALE:
Customer
ORIG. DATE REV. DATE
REV. # REV. DESC.
DECAL SIZE: CORNER RADIUS:
COLOR(S):
ARTIST:
A
100%
SCHWARZE
SCHIN029637
First Proof
3.75" x 2.375"
.25"
EOJA
CSR
NOTE: Colors shown on this proof are
only approximate. When the job is
printed, ink colors will be matched to
Dashed line represents diecut
& DOES NOT PRINT
JOB# 21526
FIRST PROOF: 05/21/04
PROOF APPROVAL
PLEASE PROOFREAD CAREFULLY.
CHECK ONE:
OK AS IS
OK WITH CHANGES
Please mark any changes on above proof.
PROOFED BY_________________
DATE_________________________
PART#
BLACK
O
RANGE
9 29639 IMPORTANT - Use Genuine
Schwarze Parts
1
Use genuine Schwarze
replacement parts.
29639
IMPORTANT
05/21/04
SCALE:
Customer
ORIG. DATE REV. DATE
REV. # REV. DESC.
DECAL SIZE: CORNER RADIUS:
COLOR(S):
ARTIST:
A
100%
SCHWARZE
SCHIN029639
First Proof
2" X 4"
.25"
EOJA
CSR
NOTE: Colors shown on this proof are
only approximate. When the job is
printed, ink colors will be matched to
Dashed line represents diecut
& DOES NOT PRINT
JOB# 21525
FIRST PROOF: 05/21/04
PROOF APPROVAL
PLEASE PROOFREAD CAREFULLY.
CHECK ONE:
OK AS IS
OK WITH CHANGES
Please mark any changes on above proof.
PROOFED BY_________________
DATE_________________________
PART#
BLACK
BLUE
Conveyer Locations, Both Sides (Mechanical Sweepers Only)
# Part # Description QTY Visual
2 22536 WARNING - Hands Off 2
2 28891 WARNING - Conveyer pins 2
I have thoroughly reviewed the proof for accuracy in copy, color layout, and size. I understand that I am responsible for the accuracy
of all information contained in this proof.
Signature Date
The proof meets my approval. Please proceed with my order. Make the changes indicated on the proof and re-proof.
P.O. Box 550
104 Celtic Circle
Madison, AL 35758
Fax: 256-772-8654
Phone: 256-772-9356
PROOF FOR APPROVAL
GF020 REV 004
PAGE 1 OF 1
Proof # 1
Date: 10-19-11
Label Wind Position:
( See Chart Below)
Customer Name: Schwarze
Customer Part #: 28891
LASI Item #: SS4362-012 art rev 000
Part Size: 3.19˝ x 5.0˝
Ink Color: Black & Orange 3519
SYSTEMS, INC.
n/a
To ensure shipment of your order on: proof approval is required by 12:00 p.m. on:
Material: White Vinyl w/Permanent Adhesive
Install elevator safety
pins before servicing
elevator hopper.
#28891
WARNING
Truck Locations
External Cab
# Part # Description QTY Visual
1 28878 CAUTION - No Welding 1
Fuel Tank
# Part # Description QTY Visual
1 1
1 29634 DANGER - No Smoking 1
1 67643 WARNING - Proposition 65 1
WARNING
Cancer and Reproductive Harm
www.P65 Warnings.ca.gov
67643
To Next Page
Loading...