8.7
Date Code 20020903 SEL-587Z Instruction Manual
Front-Panel Interface
Front-Panel Operation
Target Reset/
Lamp Test
The left-most pushbutton is dedicated to the {TARGET RESET} function.
Except while viewing or editing settings, pressing {TARGET RESET}
causes the front-panel LEDs to illuminate for a two-second lamp test and then
clears all target LEDs except for the EN LED, which is illuminated if the relay
is enabled. While viewing or editing settings, the {TARGET RESET}
pushbutton acts as a Help function, showing specific information about the
displayed setting.
To Next Page
