Seat LEON 2024 - Removing and Fitting the Headrests

Seats and headrests
125
Headrest
Removing and fitting the headrests
Fig.99 Front headrest: removal.
Fig.100 Rear headrest: removal.
Removing the front headrests
●
Lower the headrest if necessary.
●
To unlock it, look for the button underneath
the headrest and press in the direction of the
arrow ›››Fig.99
1
.
●
Remove the headrest in the direction of the
arrow
2
.
Fitting the front headrests
●
Place the headrest in the correct position on
the guides of the corresponding backrest and
insert it.
●
Press the headrest downwards until the bars
lock.
●
Adjust the headrest according to the instruc-
tions on the correct position of the seat.
Removing the rear headrests
To remove the headrest, the corresponding
backrest must be partially folded forward.
●
Unlock the backrest ›››page122.
●
Move the headrest upwards to its highest po-
sition.
●
Press button ›››Fig.100
1
, while simultane-
ously pressing on the safety hole
2
with a flat
screwdriver a maximum of 5 mm wide, and re-
move the headrest.
●
Move the backrest until it engages properly
››› in Folding down and raising the rear
seat backrest on page123.
Fitting the rear headrests
To mount the external headrests, the corre-
sponding backrest must be partially folded for-
ward.
●
Unlock the backrest ›››page122.
●
Insert the headrest bars into the guides until
they are heard to engage. It should not be pos-
sible to remove the headrest from the backrest.
●
Move the backrest until it engages properly
››› in Folding down and raising the rear
seat backrest on page123.
WARNING
Remove the rear headrests only when it is
necessary to fit a child seat. After removing a
child seat, refit the headrest immediately.