EasyManua.ls Logo

Seat LEON 2024 - Coolant Specifications

Seat LEON 2024
422 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
342
Checking and refilling levels
WARNING
Engine coolant is toxic!
Only store coolant in its original container,
tightly closed and in a safe place.
Never store motor coolant in empty food
cans, bottles or other empty containers, as it
could be ingested by another person.
Always keep motor coolant out of reach of
children.
Ensure that the coolant fluid additive per-
centage is correct, taking into account the
lowest ambient temperature expected in the
location where the vehicle is to be used.
When the outside temperature is very low,
the coolant could freeze and the vehicle
could be immobilised. In this case, the heat-
ing would not work either and inadequately
dressed passengers could die of cold.
For the sake of the environment
Coolants and additives can contaminate the
environment. If any operating fluid leaks out,
collect it and dispose of it properly and in an
environmentally friendly manner.
Coolant specifications
The factory fitted engine cooling system is filled
with a mixture of specially treated water and at
least 40% coolant additive G12evo (TL-VW 774
L).
Get information from a specialist workshop
about which coolant is suitable for your vehicle.
SEAT recommends visiting a SEAT dealership
for this.
To protect the engine cooling system, the ad-
ditive percentage should always be at least
40%. If more antifreeze protection is required
for climatic reasons, the additive proportion
can be increased. However, it should only be
increased up to a maximum of 55%, otherwise
the antifreeze protection would be reduced and
the cooling eect would be impaired.
The G12evo (TL-VW 774 L) can be recognised
by its lilac colouring. This mixture of water
and additive not only provides antifreeze pro-
tection down to -25°C (-13°F), but also pro-
tects the light alloy parts of the cooling system
against corrosion, prevents limescale build-up
and considerably raises the boiling point of the
coolant.
When topping up the coolant, a mixture of dis-
tilled water and at least 40% of the appropri-
ate coolant additive should be used for opti-
mum corrosion protection ›››page343.
WARNING
If the vehicles cooling system does not have
sucient antifreeze protection, the engine
could fail and this could result in serious in-
jury.
Ensure that the coolant fluid additive per-
centage is correct, taking into account the
lowest ambient temperature expected in the
location where the vehicle is to be used.
When the outside temperature is very low,
the coolant could freeze and the vehicle
could be immobilised. In this case, the heat-
ing would not work either and inadequately
dressed passengers could die of cold.
NOTICE
Never mix the original additives for the
G12evo coolant (TL-VW 774 L) with motor
coolant fluid not authorised by SEAT.
If the fluid in the expansion tank does not
have a pink colour (resulting from mixing the
lilac additive with distilled water), but is, for
example, brown, the suitable coolant may
have been mixed with another unsuitable
one. The coolant must be changed as soon
as possible if this is the case! Otherwise se-
rious malfunctions or damage to the engine
and the cooling system could occur!

Table of Contents

Related product manuals