EasyManua.ls Logo

Seat LEON 2024 - Vehicle Power Sockets; Volt Power Socket

Seat LEON 2024
422 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Practical equipment
247
Power sockets
1
2
Note
The use of electrical appliances with the
engine switched o will cause the 12-volt
battery to discharge.
Uninsulated devices can interfere with the
radio, infotainment system and the vehicle’s
electronic system.
Vehicle power sockets
Fig.166 Vehicle 12-volt socket.
›››Fig.166
12-volt sockets inside the front armrest.
12-volt USB sockets at the rear of the con-
sole, between the front seats.
Make sure that the maximum power of the
sockets is not exceeded. The power consump-
tion of the devices is shown on the type plate of
the devices.
The continuous output of all of the vehicles 12-
volt sockets is 120 watts in total.
When connecting two or more electrical devi-
ces at the same time, make sure that their total
consumption never exceeds 190 watts.
USB power sockets
Depending on the equipment and the country,
the vehicle may also have USB connections ex-
clusively for charging or as a power socket
›››Fig.166
2
.
These USB ports are located at the rear of the
console, between the front seats. These con-
nectors can work at a maximum power of up to
10.5W per port.
NOTICE
If the 12-volt socket is used at full power for
longer than the specified time, the fuse may
blow.
Never use the 12-volt socket at full power
for more than 10 minutes.
In the case of full power, use a single 12-
volt socket.
230-volt power socket
Fig.167 In the luggage compartment: 230-
volt power socket.
With the engine running, the power socket acti-
vates automatically as soon as a connector is
plugged in.
Maximum power consumption is 150 watts (300
watts - maximum 2 minutes).
Connect an electrical device: Open the cover
and insert the plug into the power socket as far
as possible to unlock the built-in child lock. The
socket only supplies power once the child lock
is unlocked.
LED on the power socket ›››Fig.167 (arrow)
Steady green light:
The childproof lock is unlocked. The socket is
ready to operate.

Table of Contents

Related product manuals