Seat LEON 2024 - Warning and Information Messages; Date and Time; Service Menu

Driver information
25
Instrument cluster
Warning and information messages
The system runs a check on certain com-
ponents and functions when the ignition is
switched on and while the vehicle is moving.
Faults are displayed on the instrument cluster
display as red and yellow warning symbols
›››page13 accompanied by messages and,
depending on the case, even an audible warn-
ing. The representation of the messages and
symbols may vary depending on the version of
the instrument panel.
Existing faults can also be checked man-
ually. To do this, open the Vehicle status
›››page34 menu.
Priority 1 warning (in red)
The symbol lights up or flashes (in part ac-
companied by audible warnings).
Stop driv-
ing! Danger! Check the fault and eliminate
the cause. If necessary, seek professional assis-
tance.
Priority 2 warning (in yellow)
The symbol lights up or flashes (in part accom-
panied by audible warnings). Operating faults
or the lack of operating fluids can cause dam-
age to the vehicle or a fault. Check the faulty
function as soon as possible. If necessary, seek
professional assistance.
Reference to information in the owner's
manual
Further information on any warnings can be
found in the owner's manual.
Information message
It provides information about processes in the
vehicle.
Accessing warnings and information
Existing faults can also be checked in the info-
tainment system:
●
Press > Vehicle > Vehicle status
›››page41.
Date and time
Setting the time on the infotainment system
●
Press > Settings ›››page36.
●
Select the menu option Date and time.
●
OR set the date and time in the instrument
cluster’s Service menu.
Service Menu
In the Service menu various settings can be ad-
justed depending on the features.
Open the Service menu
●
While in Classic View, go to the circle on the
left and select the odometer, then press the
button on the multifunction steering wheel for
around 5 seconds and then release it.
●
Next, the Configuration list menu is dis-
played, where you can choose between the
Service menu or View selection from where
the instrument cluster views can be switched on
and o.
Restart the service interval indicator
Select the Service menu and follow the in-
structions on the instrument cluster display.
Reset the oil service
Select the Reset Oil service menu and follow
the instructions on the instrument cluster dis-
play.
Identifying letters on engine (LDM)
Select the menu Engine code. The identifying
letters of the engine will be shown on the instru-
ment cluster display at the bottom left.
Next Service
This specifies when the next workshop inspec-
tion is scheduled.