Seat LEON 2024 - Adjusting the Exterior Mirrors

140
Visibility
1)
Do the opposite in right-hand drive vehicles.
/
Adjusting the exterior mirrors
Fig.112 Driver’s door detail: exterior mirror
control.
Turn the control to the corresponding position.
By moving the control to the desired posi-
tion, adjust the rear view mirrors on the
left side ( ) and on the right side ( ) in the
desired direction.
Depending on the equipment fitted on
the vehicle, the mirrors may be heated ac-
cording to the outside temperature.
Fold the mirrors ››› .
The exterior mirror cannot be adjusted and
all functions are deactivated.
Activating exterior mirror functions
The following exterior mirror functions can
be activated and deactivated in the vehi-
cle settings menu of the infotainment system
›››page39.
Note
The exterior mirror functions are described
below. For left-hand drive vehicles, position
corresponds to the exterior mirror on the
driver’s side and position corresponds to
the exterior mirror on the passenger’s side.
Do the opposite for right-hand drive vehicles.
Synchronized regulation of the exterior mir-
rors
The synchronised mirror setting simultaneously
adjusts the right hand exterior mirror when the
left mirror is adjusted.
●
Turn the control to position
1)
.
●
Adjust the left-hand exterior mirror. The right
exterior mirror will be adjusted at the same time
(synchronised).
●
If necessary, correct the setting of the right
hand mirror: turn the control to position
1)
.
Folding the exterior mirrors when locking the
vehicle
When the vehicle is locked or unlocked from the
outside, the exterior mirrors may fold in or out
automatically, depending on the equipment.
For this purpose, the rotary control has to be
in position , , , or .
If the rotary control of the electric exterior mir-
rors is in the folded position, the exterior mirrors
remain folded.
Memory function
The memory buttons ›››page126 can be used
to save and turn on settings for the exterior mir-
rors.
The settings will also be saved in the user of the
online services.
Saving the passenger rear view mirror set-
tings for reversing
●
Switch the ignition on.
●
In the infotainment system, select > Vehi-
cle > Exterior > Mirrors ›››page39.
●
Select position
1)
on the control.
●
Select reverse gear.
●
Adjust the front passenger exterior mirror so
that you can see, for example, the kerb area
well.