Special characteristics
During an active Apple CarPlay™ connection,
the following characteristics are applicable:
●
Bluetooth® connections between the
iPhone™ and the infotainment system are not
possible.
●
If there is an active Bluetooth® connection, it
is automatically interrupted.
●
It is not possible to use the built-in naviga-
tion system and the Apple CarPlay™ navigation
system at the same time. The last route started
interrupts the one that was previously active.
●
Depending on the infotainment system you
use, on the instrument cluster display you can
view data from the Telephone mode.
●
Only navigation instructions from compatible
apps are displayed on the instrument cluster's
screen.
●
With the multifunction steering wheel you can
accept or reject incoming calls, as well as end
an ongoing telephone conversation.
Voice control
●
Press on the multifunction steering wheel
briefly to start voice control using the infotain-
ment system.
●
Press and hold this button to start voice con-
trol (Siri™) of the connected iPhone™.
Note
●
The availability of technologies depends
on the country and may vary.
●
You will find information about technical
requirements, compatible iPhones, certified
applications and their availability on the
SEAT (www.seat.com) and Apple CarPlay™
websites, or at SEAT dealerships.
Android Auto™
Requirements for Android Auto™
In order to use Android Auto™, the following re-
quirements must be met:
●
The mobile phone device, called smartphone
from here on, must be compatible with Android
Auto™.
●
The smartphone must have an Android Auto™
application installed.
●
If this is not possible via Android Auto™ Wire-
less, the smartphone must be connected to the
infotainment system via a USB connection with
data transmission.
●
The USB cable used must be an original ca-
ble provided by the smartphone manufacturer.
Android Auto™ Wireless: The smartphone’s
Bluetooth® and Wi-Fi signal also have to be on.
Establish connection
When you first connect a smartphone, follow
the instructions on the infotainment system dis-
play and on the smartphone.
The requirements must be met to use Android
Auto™.
Launch Android Auto™:
●
Press MENU > Full Link to access the Full Link
main menu
●
Press Android Auto™ to establish a connec-
tion with the smartphone.
Disconnecting
●
In Android Auto™ mode, press the SEAT
icon to access the Full Link main menu.
●
Press to interrupt the active connection.
Special characteristics
During an active Android Auto™ connection, the
following characteristics are applicable:
●
An active Android Auto™ device can be con-
nected at the same time via Bluetooth® (HFP
profile) with the infotainment system.
●
It is possible to use the phone’s functions
through Android Auto™. If the Android Auto™
device is connected at the same time via Blue-
tooth® with the infotainment system, the tele-
phone function of the infotainment can also be
used.
To Next Page
Loading...
