Wired and wireless connections
●
It is not possible to use the built-in navigation
system and the Android Auto™ navigation sys-
tem at the same time. The last route started
interrupts the one that was previously active.
●
Telephone and Media data can be displayed
on the instrument cluster display.
●
Only navigation instructions from compatible
apps are displayed on the instrument cluster's
screen.
●
With the multifunction steering wheel you can
accept or reject incoming calls, as well as end
an ongoing telephone conversation.
Voice control
●
Press on the multifunction steering wheel
briefly to start voice control using the infotain-
ment system.
●
Press and hold this button to start voice con-
trol (Google Assistant) on the connected smart-
phone.
Note
●
The availability of technologies depends
on the country and may vary.
●
You will find information about technical
requirements, compatible mobile phone de-
vices, certified applications and their avail-
ability on the SEAT (www.seat.com) and An-
droid Auto™ websites, or at SEAT dealerships.
Wired and wireless connec-
tions
USB connection
Fig.168 Centre console: USB input.
Fig.169 Rear centre console: USB connectors
with power socket function.
The USB port can be found in the storage
compartment area of the front centre console
›››Fig.168.
Depending on the equipment and the country,
the vehicle may also have USB connections ex-
clusively for charging or as a power socket.
These USB ports are located at the rear of the
console, between the front seats ›››Fig.169.
Note
Before switching the ignition on or o, unplug
the appliances from the USB ports to protect
them from any damage caused by fluctua-
tions in voltage.
To Next Page
Loading...
