Configuration for sharing a connec-
tion over WLAN
Establishing the connection with the wire-
less network (WLAN)
●
Press the HOME > button.
●
Activate the wireless network. To do this, tap
the function button Network > Wi-Fi > Infotain-
ment system as hotspot.
●
Activate the wireless network (WLAN) on the
device that is to be connected. If necessary,
refer to the manufacturer’s instruction manual.
●
Activate the mobile device assignment in the
infotainment system. To do this, press the func-
tion button Use as hotspot and check the
checkbox.
●
Enter and confirm the network key displayed
on the device.
The following adjustments can also be made in
the Infotainment system as hotspot menu:
●
Network key: Network key generated auto-
matically. Press the function button to change
the network key manually. The network key
must have at least 12 characters and a maxi-
mum of 62.
●
SSID: Name of the WLAN network (maximum
32 characters).
The WLAN (wireless) connection is established.
To complete the connection, it may be neces-
sary to enter other data into the device.
Depending on the version, it is only possi-
ble to connect in Hotspot mode to get SEAT
CONNECT, and a maximum of 5 devices can be
connected.
Repeat this process to connect other devices.
There is also the option of scanning the QR
code to connect the device directly to the in-
fotainment system’s Wi-Fi network without hav-
ing to enter the password: select Settings >
Network > Quick connection to infotainment
system.
Configure Internet access
The infotainment system can use the WLAN hot-
spot of an external device to establish an Inter-
net connection.
Establishing the connection with the wire-
less network (WLAN)
●
Activate and share a wireless hotspot with In-
ternet on the external device. Refer to the man-
ufacturer’s instruction manual.
●
Press the HOME > button.
●
Tap the menu Settings > Network > Wi-Fi >
Wi-Fi and tick the verification box.
●
Press the Search for Wi-Fi button and select
the device you want from the list.
The system preferentially searches for devices
in the 5 GHz Wi-Fi band. If no results are found,
it is advisable to check the device’s access
point settings.
●
If necessary, enter the network key of the
device in the infotainment system and confirm
with OK.
Manual settings:
●
To manually enter the network settings of an
external (WLAN) device.
The WLAN (wireless) connection is established.
To complete the connection, it may be neces-
sary to enter other data into the device.
Note
Due to the large number of devices on the
market, it is not possible to guarantee fault-
free operation of all functions.
Full Link
Introduction
With Full Link it is possible to view and use
the contents and functions that are shown on
the mobile phone device on the infotainment
screen.
To do this, the mobile phone device must
be connected with the infotainment system
through a USB interface.
To Next Page
Loading...
