EasyManua.ls Logo

Seat LEON 2024 - Visual Indication Segments; Rear Park Assist

Seat LEON 2024
422 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Parking and manoeuvring
231
Rear park assist
1)
The RVC button will only be displayed when reverse gear is engaged.
Switch to the reverse assist image (Rear
View Camera “RVC”)
Select reverse gear.
OR: press the RVC button on the Infotainment
System screen.
1)
A short confirmation signal will be heard and
the button symbol will light up when the system
is switched on.
NOTICE
Park assist plus only connects automatically
when driving very slowly. If driving style is
not adapted to the circumstances, an acci-
dent and serious injury or damage may be
caused.
Visual indication segments
Fig.154 Parking aid view on the Infotainment
system display.
The optical indication of the segments works as
follows:
Grey segments: the obstacle is more than
approx. 30 cm away from the path or in the
direction opposite to travel. They are also dis-
played when the electronic parking brake is ac-
tivated.
Yellow segments: the obstacles lie on the
vehicles path and are at a distance of less than
approx. 30 cm away.
Red segments: obstacles are less than ap-
prox. 30 cm away.
A guiding track will indicate the anticipated for-
ward or backward trajectory, depending on the
gear that is engaged.
If an obstacle is located in the vehicles way, the
corresponding audible warning will sound.
When the penultimate segment is displayed,
the vehicle has reached the collision zone. In
the collision zone, obstacles are shown in red
(including those outside the trajectory). Stop
the vehicle! ››› in Description on page229
Rear park assist
Description
Rear park assist is a visual and audible assis-
tant that warns of obstacles located behind the
vehicle.
There are sensors integrated in the rear
bumper. When they detect an obstacle, you are
alerted by audible and visible warnings on the
Infotainment system.
Particularly make sure that the sensors are not
covered by adhesives, residues, dirt and the
like, as this could aect the system's operation.
Cleaning instructions ›››page381.
The approximate measurement range of the
rear sensors is:
Side area: 0.60 m
Central area: 1.60 m

Table of Contents

Related product manuals