Seat LEON 2024 - Interior and Reading Lights; Interior Lights

134
Lights
Note
“Tourist light” is only allowed temporarily. If
you are planning a long stay in a country that
drives on the other side, you should take the
vehicle to an Authorised Technical Service to
change the headlights.
Interior lights
Lighting of the instrument cluster,
displays and controls
The instrument and control lighting brightness
can be set in the vehicle settings menu of the
infotainment system ›››page39.
The set intensity automatically adapts to
changes in ambient brightness in the vehicle.
When the automatic dipped beam light
is turned on, a sensor automatically turns the
dipped beam light on or o, along with the in-
strument and control lighting, depending on the
ambient brightness.
In some cases, e.g. when driving through a tun-
nel without the automatic dipped beam light
function switched on, the instrument clus-
ter lighting may even switch o. The objective
of this function is to provide the driver with a
visual indication that he or she should activate
the dipped beam. If your vehicle is fitted with a
digital instrument cluster, the message Turn on
the lights will be displayed on the instrument
cluster.
Interior and reading lights
Fig.106 Detail of headliner: front interior
lighting.
Turning the interior lights on or o.
Door contact connection. The interior
lights come on automatically when you
unlock the vehicle, open a door or discon-
nect the ignition. The light goes out a few
seconds after closing all the doors, when
locking the vehicle or connecting the igni-
tion.
Reading light
The reading light is tactile, each lens is turned
on and o individually by pressing in the re-
spective central area. In addition, the intensity
of the light can be adjusted according to the
pressure exerted.
If you want to turn on the two lenses together
you must press the symbol
›››Fig.106.
Glove compartment and luggage compart-
ment lighting
When opening and closing the glove compart-
ment on the front passenger side and the rear
lid, the respective light will automatically switch
on and o.
Footwell lighting
The lights in the footwell area below the dash
(driver and front passenger sides) will switch on
when the doors are opened and will decrease
in brightness while driving. This brightness can
be adjusted through the infotainment system
menu using the function button > Lighting >
Settings ›››page39.
Note
The reading lights go out when the vehicle
is closed and locked or after a few minutes
of turning the ignition o. This prevents the
battery from discharging.