Seat LEON 2024 - Steering Wheel Heating

Air conditioning
151
Heating, ventilation and cooling
NOTICE
●
To avoid damaging the heating elements of
the seat heaters, do not kneel on the seat or
apply sharp pressure to a single point on the
seat cushion or backrest.
●
Liquids, sharps objects and insulating ma-
terials (e.g. covers or child seats) can dam-
age the seat heating.
●
In the event of odours, switch o seat heat-
ing immediately and have it inspected by a
specialised workshop.
●
If the original seat upholstery is replaced
by another material, seat heating may over-
heat or its operation may be limited.
For the sake of the environment
Seat heating should remain on only when
needed. Otherwise, it is unnecessary energy
consumption.
Note
Please note the following for the smart
heated seats feature:
●
The system may reset the learning process
if it has not been satisfactory.
●
Separate driver’s seat learning will be re-
quired for each registered user.
●
The passenger seat learns regardless of
the active registered user.
●
In hybrid vehicles the use of the stationary
air conditioning function with electricity con-
sumers ›››page156 may aect the learn-
ing time of the function.
Steering wheel heating
The selected steering wheel heating level will
be displayed on the instrument cluster display
and in the air conditioning menu.
Adjusting steering wheel heating by press-
ing on the multifunction steering wheel
●
Short press (less than 1 second):
Heating is switched on at its maximum level.
Press the steering wheel button repeatedly to
set the desired level. To switch o steering
wheel heating, press the steering wheel button
repeatedly until the heated steering wheel
icon is displayed on the instrument cluster.
●
Long press (more than 1 second):
Heating is switched o directly from the current
operating level Another long press on the but-
ton switches on heating directly at the last level
saved before switching o.
Adjusting steering wheel heating via the in-
fotainment system
●
In the air conditioning menu, press the steer-
ing wheel heating function button . Heating is
switched on at its maximum level.
●
Press the function button repeatedly to set
the desired level.
●
To switch o steering wheel heating, press the
function button several times until no LED is on.
Automatic disconnection
Steering wheel heating will be switched o au-
tomatically when any of the following condi-
tions are met:
●
Electrical energy consumption is too high.
●
The steering wheel heating system is faulty.
●
If the ignition is switched o.
Parking ventilation
The vehicle interior can be ventilated with the
stationary ventilation function (depending on
equipment).
The power required for parking ventilation will
be provided by the vehicle's 12V battery.
The ventilation function is controlled using the
My SEAT App.
Switching on the stationary ventilation
The function can be switched on as follows:
●
The parking ventilation function can be
switched on immediately using the immediate
on/o button.
●
By programming a departure time.