Heating, ventilation and cooling
Seat heating
Fig.117 Schematic representation: Seats menu
The front seats have three levels of electric
heating.
Turning on the seat heating
There are several ways to switch on the front
seat heating:
●
Tap on the symbol located in: main menu
Seats > Air conditioning.
●
Tap on the Climabar symbol ›››Fig.114.
●
Tap with two fingers at once on touch
zones
1
(for driver) and
2
(for passenger)
›››Fig.114.
Controlling seat heating
●
Press the corresponding seat function but-
ton to switch on the seat heating to maximum
power.
●
Press the function button of the correspond-
ing seat repeatedly until the desired level is set.
●
To switch o seat heating, press the corre-
sponding seat icon several times until no LED is
on.
If the passenger leaves his or her seat while the
seat heater and drive system are switched on,
the heating of that seat switches o automati-
cally. The indication on the infotainment system
turns grey after approx 2 seconds. If the pas-
senger sits down again while the drive system
is still switched on, the seat heating switches on
again automatically.
If the heating of this seat switches o automat-
ically, you can switch it on again manually if
necessary, even if the seat is unoccupied.
Smart heated seat
Availability depending on the equipment. This is
an smart function that automatically activates
and regulates the driver and front passenger
seat heating for greater comfort.
The seat heating for the driver's seat and front
passenger seat can be adjusted separately to
achieve fully adapted comfort. In addition, in
To Next Page
Loading...
