EasyManua.ls Logo

Seat LEON 2024 - Coolant Tank; Preliminary Steps

Seat LEON 2024
422 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Checking and refilling levels
343
Cooling system
1
2
For the sake of the environment
Motor coolant and its additives can pollute
the environment. If any operating fluid leaks
out, collect it and dispose of it properly and
in an environmentally friendly manner.
Coolant tank
Valid for: hybrid vehicles.
Fig.225 Engine compartment: Coolant tanks
Hybrid vehicles have 2 independent coolant ex-
pansion tanks.
›››Fig.225
Coolant expansion tank for the combustion
engine.
Coolant expansion tank for the high-volt-
age system. Visually check the coolant
level of the high-voltage system Do not
open it! It is sealed.
If the coolant level in the cooling system of the
high-voltage system is too low:
Do not top up coolant!
Contact a specialised workshop immediately.
Check and refill the coolant
Fig.226 In the front compartment: marking on
coolant expansion tank.
Fig.227 Front compartment: coolant
expansion tank cap.
Preliminary steps
Park the vehicle on a firm, flat surface.
Wait until the engine has fully cooled ››› .
Open the front bonnet.
The motor coolant expansion tank can be
recognised by the symbol on the cap
›››Fig.227
Check the level
When the vehicle is delivered (new vehicles),
the coolant may be above the marked area.
This is normal. It is not necessary to suck the
coolant out.
When the engine is cold, check the coolant
level using the side marking on the expansion
tank ›››Fig.226. The coolant level should be
between the marks.

Table of Contents

Related product manuals