●
In order to guarantee good operation, keep
the sensors clean, free of snow and ice, and
do not cover them with stickers or other ob-
jects.
●
If you use high-pressure or vapour equip-
ment for cleaning, do not apply it directly,
unless you do so very briefly, and always
keep a distance of more than 10 cm away.
●
Fitting certain accessories to the front of
the vehicle, such as a plate holder with ad-
vertising, may interfere with the operation of
the Park Assist.
●
We recommend that you practice parking
in an area without trac.
●
The volume and tone of the signals and
indications can be changed.
●
Please observe information on towing a
trailer.
Note
In vehicles without an infotainment system,
these parameters can be modified in a SEAT
Ocial Service or in a specialised workshop.
Operating Park Assist Plus
Switching on and o manually
●
Press button in the infotainment system (
> Assistants > Parking assist > Parking aid).
Automatic activation
●
Select reverse gear.
●
OR: if you drive forward at a speed of less
than 15 km/h (9 mph) and you encounter an
obstacle, it is detected when it is optically ap-
prox. less than 95 cm. away, or acoustically ap-
prox. 50 cm. away. If the automatic connection
is activated, a reduced display is shown.
●
OR: if the vehicle moves back a certain dis-
tance (between approx. 10 and 20 cm approx
depending on whether or not an obstacle is
detected).
When the Plus Parking Aid connects automat-
ically, a diagram of the vehicle and the seg-
ments will appear on screen. This function will
be available unless the user has deactivated it.
It only operates every time the speed drops be-
low 15 km/h (9 mph) for the first time.
Automatic activation of park assist can be
switched on and o in the infotainment system:
●
Switch the ignition on.
●
In the infotainment system select > Assis-
tants > Parking > Parking aid.
●
Check the Automatic activation box.
If activated automatically, an audible sound
warning will only be given when obstacles in
front are at a distance of less than 50 cm. ap-
prox.
If it is switched
o using the button in the in-
fotainment system, one of the following actions
must be taken for it to reactivate automatically:
●
Switch o the ignition and switch it on again.
●
EITHER: drive forward at over approx. 15km/h
(9mph).
●
OR: activate or deactivate the parking lock
button P.
●
OR: switch the automatic activation on and
o in the Infotainment system.
Automatic disconnection
●
Drive forward at 15 km/h (9mph) or faster.
●
OR: press the parking lock button P.
Temporary sound suppression
●
Press the function button on the infotain-
ment screen.
●
OR: activate the electronic parking brake.
Change from reduced view to full view
●
Engage the reverse gear if your vehicle is
equipped with a reversing camera.
●
Press the car icon on the reduced view
●
OR: if the vehicle moves back a certain dis-
tance (between approx. 10 and 20 cm approx
depending on whether or not an obstacle is
detected).