Active
Passive
Pairing, connecting and managing
Requirement for pairing:
●
Bluetooth® is activated on the mobile phone
device.
●
Bluetooth® is activated on the infotainment
system.
●
Depending on the mobile device, it will be
necessary to have the Bluetooth® menu open
or activate the Visibility option so that the de-
vice is visible from the infotainment system.
●
The vehicle must be stopped or someone
must be detected in the front passenger seat
to perform the pairing.
Pair a mobile phone device suitable for teleph-
ony with the infotainment system to use the tel-
ephone interface functions. When making the
first connection, the mobile phone device is
paired with the infotainment system. Doing so
saves a user profile.
The pairing can take a few minutes. The func-
tions available depend on the mobile phone
device used and its operating system.
Pair a mobile phone device
1.
Open the list of available Bluetooth® devi-
ces on the mobile phone device and select
the name of the infotainment system.
2. Please note and, if necessary, confirm the
messages that appear on the mobile phone
device and on the infotainment system. If
the pairing was successful, the phone data
is saved in the user profile.
3. Optional: confirm the data transfer mes-
sage on the mobile phone device.
Active and passive connection
To use the functions of the telephone interface,
there must be at least one mobile phone device
connected to the infotainment system. If there
are several mobile phone devices connected
to the infotainment system, you can switch be-
tween active and passive connections. To use
the telephone interface with the desired mobile
phone device, establish the active connection
with the infotainment system.
Dierence between connection types
The mobile phone device is paired and
connected. The functions of the telephone
interface are performed with the data of
said mobile phone device.
The mobile phone device is paired and
connected. Calls can be managed but the
phone book, messages or other functions
will not be active.
Paired mobile phone devices are stored in the
infotainment system, even if they are not cur-
rently connected.
Connect a mobile phone device
Requirement: the mobile phone device is paired
with the infotainment system.
●
Bluetooth® is activated on the mobile phone
device.
Establish an active connection
Requirement: several mobile phone devices are
connected to the infotainment system at the
same time.
●
Select the desired mobile phone device from
the drop-down menu. All other mobile phone
devices are automatically in a passive connec-
tion.
Voice control with Android Auto™ or Apple
Carplay™ technologies active
The voice control functions for phones may not
be available on all mobile devices, so pressing
and holding the voice control activation button
on the multifunction steering wheel can be
used to activate the mobile device’s voice as-
sistant.
WARNING
If you perform the pairing while driving, it
could cause an accident or injury.
●
Perform pairing only with the vehicle at a
standstill.
To Next Page
Loading...
