Seat LEON 2024 - Page 32

30
Driver information
System limits aecting the driver at-
tention monitor
The driver attention monitor has system related
limitations. The following conditions may limit
the operation of the driver attention monitor or
prevent it from operating at all:
●
Speeds below 10 km/h.
●
Severe driver distraction due to external influ-
ences such as trac.
●
Severe driver distraction due to actions not
related to the vehicle (for example, using a mo-
bile device).
Driving with the driver attention
monitor
Connection and disconnection
You can switch the driver attention monitor on
and o manually.
In the infotainment system:
1. Open the Assistance systems menu.
2. Switch the driver attention monitor on
or o in the corresponding submenu
›››page39.
Note
If the function was manually switched o
during the last journey, this setting will stay
the same when the vehicle is started again.
Activating and deactivating the audible
warning
1. Open the Assistance systems menu.
2. Open the Attention Monitor.
3. Activate or deactivate the audible warn-
ing under the corresponding option
›››page39.
Sensitivity adjustment
You can manually adjust the sensitivity of the
driver attention monitor and thereby influence
how quickly the system reacts to your driving
behaviour.
In the infotainment system:
1. Open the Assistance systems menu.
2. Open the Attention Monitor.
3. Select the sensitivity in the Sensitivitysub-
menu›››page39.
Concealing messages via the multi-function
steering wheel
1. Press the button on the multifunction
steering wheel.
Driver attention monitor warning lev-
els
If the system detects that the driver is distrac-
ted, it indicates this on the screen of the in-
strument cluster by a control or warning lamp
in combination with a supplementary text mes-
sage. Depending on the configuration, it also
emits an audible warning. The warning is issued
at three levels.
Driver attention monitor warning - Stage 1.
Distraction detected.
Depending on the configuration, an au-
dible warning may be issued. A white
control lamp and a text message are
shown on the instrument cluster screen.
Stop making operating inputs and pay at-
tention to the trac.
Driver attention monitor warning - Stage 2.
Risk detected.
Depending on the configuration, an au-
dible warning may be issued. A red warn-
ing lamp appears is shown on the instru-
ment cluster screen together with a text
message. Stop making operating inputs
and pay attention to the trac.
Driver attention monitor warning - Stage 3.
Serious risk identified.
An audio signal sounds. A red warning
lamp appears is shown on the instrument
cluster screen together with a text mes-
sage. Serious trac risk. Stop making op-
erating inputs immediately and pay atten-
tion to the trac.