Connectivity
Pairing of portable devices sup-
porting the MirrorLink
®
, Android
Auto™ and/or Apple CarPlay™
technologies
Fig. 17
Full Link menu
Carousel
When you enter the Full Link context for the
first time, the technologies available for pair-
ing the portable device are displayed.
Once the device connects via USB, the sys-
tem will offer you the technologies available
for establishing a connection with your mo-
bile phone.
In the event of simultaneous connections be-
tween two devices with different operating
systems, a choice will be presented for which
one to make the connection with
›››
Fig. 17.
View of the device list
iPhone™ devices only support Apple Car-
Play™.
There are some Android devices that support
MirrorLink
®
and Android Auto™.
Bear in mind that once the device is connec-
ted it will not be available as an audio source.
Full Link setup
Function button: function
Activating data transfers for SEAT applications : allows
the exchange of information between the vehicle and
applications authorised by SEAT.
Last Mode
If a session using one technology ends with-
out the disconnection being made from the
Infotainment system (simply by disconnect-
ing the cable) then when the device is next
connected to it, the session will start without
the user being required to take any action
1)
.
Information
Consult the mobile device manual.
Depends on each technology:
Availability in a country
Third party applications
For further information:
MirrorLink
®
:
www.mirrorlink.com
Apple CarPlay™:
www.apple.com/ios/carplay
Android Auto™:
www.android.com/auto
Note
●
In order to use Android Auto™ technology
it is necessary to download the Android
Auto™ application, located on Google
Play™.
●
Only compatible applications can be
used, in accordance with the technology
connected.
1.
2.
1)
Unless the device requires the screen to be un-
locked in order to establish the connection.
22
To Next Page
Loading...
