Telephone management system
Note
To prevent them from being heard through
the speakers, the button and mobile tele-
phone alert tones must be disconnected.
Where necessary, disconnect the headset
from the mobile telephone you wish to con-
nect to the system.
Pair and connect a mobile tele-
phone to the Infotainment system
In order to manage a mobile telephone via
the Infotainment system, it is necessary to
pair both devices once.
For your safety, we recommend you make the
link when the vehicle is stationary. In some
countries it is not possible to perform the pair-
ing with the vehicle running.
Conditions
You must guarantee the following setup in the
mobile phone and the Infotainment system:
●
The ignition must be switched on.
●
The Bluetooth
®
function of the mobile tel-
ephone and the Infotainment system must be
active as well as visibility.
●
The keypad lock on the mobile telephone
must be deactivated.
Follow instructions in the manual for the mo-
bile telephone.
During the pairing process, it is necessary to
enter data via the mobile telephone's keypad.
Starting mobile telephone pairing
●
Make sure the mobile device's Bluetooth
®
function is activated and visible.
●
Press the infotainment
button.
●
Press the Find telephone function button and
then Results
.
OR:
●
Press the infotainment
button.
●
Press the SETTINGS function button.
●
Press the Select mobile phone function but-
ton and then
Results
.
OR:
●
Press the infotainment
button.
●
Press the SETTINGS function button.
●
Press the Bluetooth® function button.
●
Press the
Find devices
function button and
then Results .
OR:
●
Establish the connection from the settings
menu of the mobile telephone.
The name of the Bluetooth
®
function of your
Infotainment system will be displayed on the
main
Telephone screen and you can edit this
name via the Bluetooth® settings menu
›››
page 89
The search process can take up to 1 minute.
On the screen, the system will dynamically
update the names of the Bluetooth
®
devices
found.
As soon as the search is completed, the
names of the Bluetooth
®
devices found are
displayed on-screen.
●
Select the Bluetooth
®
device you want to
connect on the infotainment system. In cer-
tain circumstances, it is possible that to finish
the connection between the two devices, you
must enter additional data in the mobile tele-
phone and Infotainment system.
●
Use your mobile telephone to enter and
confirm your PIN code, as indicated in the dis-
play of the infotainment system.
●
If more Bluetooth
®
profile pairing requests
are received on the mobile telephone, make
sure to reply to them.
OR:
●
Compare the PIN code shown on the dis-
play of the Infotainment system with that
shown on the mobile telephone. If they
match, confirm on both devices.
The infotainment system and the mobile tele-
phone will now be connected to each other.
»
81
To Next Page
Loading...
