Audio and Media Mode
Starting and stopping the scan function
Starting the
scan function
Press the SETTINGS function but-
ton and then select SCAN .
Stopping the
scan function
Press the function button to
stop the scan function at the sta-
tion that is currently playing.
Manually selecting a station with
the memory buttons or changing
the screen also stops the scan
function.
Traffic news (TP)
Traffic information tracking with the TP func-
tion is only possible if the station is available.
The stations with the traffic information func-
tion are indicated in the RADIO main menu
and in the list of stations by the
TP
symbol
›››
Fig. 23 and
›››
Fig. 24.
Some stations that do not broadcast their
own traffic information support the TP func-
tion by broadcasting traffic warnings from
other stations (EON).
Switching the TP function on and off
●
Using the
Setup (FM, AM, DAB)
menu,
activate
or deactivate
the
Traffic programme (TP) by pressing it
›››
page 36.
Active TP function and station selection
Traffic warnings are played in Audio mode.
If a station is selected without the
TP
function
in FM mode, the radio tries to find stations
with this function in the background. If no sta-
tion is found, this will be indicated half way up
the left of the screen
.
In AM mode or media mode, the unit will al-
ways automatically tune to a traffic news sta-
tion in the background, provided that one is
available. This procedure may take some
time, depending on the situation.
Incoming traffic announcement
In active Audio mode, an incoming traffic an-
nouncement will play automatically.
During the traffic announcement, a pop-up
window is displayed and the radio changes,
depending on the case, to the traffic news
station (EON).
The media mode is paused and the volume is
adjusted to the preset level
›››
page 93.
The volume of the traffic announcement can
be modified with the volume control
. The
adjusted volume setting will be applied to
subsequent announcements.
●
Press the Cancel function button to end the
current traffic announcement. The TP func-
tion remains switched on.
●
OR: Press the Deactivate function button to
end the current traffic warning and perma-
nently deactivate the TP function. This can
be reactivated in the Settings menu.
Setup (FM, AM, DAB)
FM setup
Select the FM frequency band by pressing
the Infotainment button
.
OR: Press the BAND function button and se-
lect the FM frequency band.
Press the SETTINGS function button to open
the
FM Settings
menu.
Function button: function
Sound : Sound settings
›››
page 93.
Scan : Scan function. When the scan function is ac-
tive, all available stations on the current frequency
band are played in sequence for approximately 5
seconds
›››
page 35.
Seek mode : To adjust settings for the buttons with the
arrows
and
. This setting applies to all frequency
bands (FM, AM and DAB).
Preset list : All stored stations on the selected fre-
quency band can be browsed with the arrow
buttons.
Station list : All available stations on the selected
frequency band can be browsed with the arrow
buttons.
36
To Next Page
Loading...
