Navigation
Road sign indicators
The road sign indicators must be active in the
Navigation Setup
menu
›››
page 69.
If road signs for the road being travelled are
stored in the navigation data, the system can
show them on the map display (e.g. a speed
restriction).
Please bear in mind how recent the naviga-
tion data is and the limitations of the system
›››
page 58 !
Traffic sign recognition
Some vehicles are also equipped with a cam-
era for traffic sign recognition. If traffic sign
recognition is installed in the vehicle and acti-
vated, the recognised traffic signs and addi-
tional information are displayed in the map
view.
Read and take note of the information and in-
dications provided by the traffic sign recogni-
tion system in the vehicle
›››
Booklet Instruc-
tion Manual.
Route guidance in demo mode
If demo mode is activated in the
Navigation
Settings
menu
›››
page 69, an additional
pop-up window opens when you start route
guidance.
●
Pressing the Demo mode function button
starts a “virtual route guidance” to the desti-
nation you have entered.
●
If you press the Normal function button, a
“real route guidance” starts.
The sequence of events and the operations in
virtual route guidance are similar to those in
real route guidance.
Virtual route guidance is repeated when you
reach the fictitious destination and always
starts again from the starting point if not
aborted beforehand.
If the starting point for demo mode has been
defined manually in the
Navigation Set-
tings
menu, virtual route guidance will start
from the position set.
A manually entered starting point is overwrit-
ten with the current vehicle location if the ve-
hicle moves off.
Note
Disable demo mode after use, otherwise
you will be prompted to choose between
virtual and normal route guidance each
time you start route guidance.
Navigation settings
Settings
●
Press the SETTINGS function button in the
main Navigation menu.
Function button: function
Route options : To make adjustments to route calcula-
tion.
Suggest 3 alternative routes : After starting route
guidance, 3 alternative routes are suggested
›››
page 61.
Route : Select the route type.
Economical : The route is calculated by taking
into consideration economic factors.
Fast : The fastest route to the destination.
Short : shortest route to the destination, even if
it results in a longer travelling time.
Most frequent routes : Information on the user's
most frequent routes.
Dynamic route : Dynamic route guidance is acti-
vated when a TMC is received
›››
page 66.
Avoid motorways and highways : Motorways will be
excluded from the calculation whenever possible.
Avoid ferries and motorail trains : Ferries and moto-
rail trains will not be considered in the calculation
of the route whenever possible.
Avoid toll roads : Toll roads will be excluded from
the calculation whenever possible.
»
69
To Next Page
Loading...
