Connectivity
MirrorLink
®
Fig. 18
Function buttons in the general view of
compatible applications.
Fig. 19
Other MirrorLink function buttons.
MirrorLink
®
is a protocol which enables com-
munication between a portable device and
the Infotainment system via USB.
Using it makes it possible to display and man-
age the content and functions displayed on
the portable device on the Infotainment sys-
tem screen.
To avoid distracting the driver while driving,
only specially adapted applications can be
used
›››
in Full Link technology descrip-
tion on page 18.
Requirements
In order to use MirrorLink
®
, the following re-
quirements must be met:
●
The mobile device must be compatible with
MirrorLink
®
.
●
The mobile device must be connected to
the Infotainment system via USB.
●
Depending on the mobile device used, a
suitable application must be installed for the
use of MirrorLink
®
on the device.
Initiating the connection
●
In order to initiate the connection with the
mobile device, it is simply necessary to con-
nect it to the Infotainment system via the USB
connection.
●
A pop-up screen will appear, which will re-
quest that you accept the device.
Function buttons and possible messages
Function button: function
Full Link
To return to the Full Link main
menu.
Function button: function
CLOSE APPS
Press to close the open apps.
Then press the apps to be closed
or the Close all function button to
close all the open applications.
1 : 1
Press to change to the mobile de-
vice screen.
SETTINGS To open the Full Link setup
›››
Fig. 19
1
Press to return to the MirrorLink
®
main menu.
›››
Fig. 19
2
Press to display all the function
buttons in the lower or upper
right-hand margin of the screen.
›››
Fig. 19 /
Allows buttons
1
and
2
to be
hidden or shown.
›››
Fig. 2
12
MirrorLink
®
setup
Function button: function
Activate MirrorLink pop-up windows: Allows Mirror-
Link
®
pop-up windows in applications that support it.
23
To Next Page
Loading...
