Seat NAVI SYSTEM PLUS - Scan Function

Audio and Media Mode
Selecting stations
Selecting sta-
tions from the
station list
Press the STATION LIST
›››
Fig. 23
function button to open the station
list.
Search through the list and press
the required station to select it.
To close the station list, press the
BACK

function button
›››
Fig. 24.
The station list closes automatical-
ly after a period of inactivity.
Manually tuning in a station frequency.
Viewing the
frequency dial
Press the MANUAL function button
›››
Fig. 23.
Changing the
frequency in
steps
Turn the adjustment knob.
OR: Press the + or – keys on the
dial that appears on the screen.
Browsing the
frequency
band quickly
Press and hold one of the arrow
buttons on the left of the multifunc-
tion steering wheel. After releasing
the arrow button, the unit automat-
ically tunes to the next available
radio station.
OR: Place your finger on the slider
in the frequency range and drag it
to move the button.
Manually tuning in a station frequency.
Hiding the fre-
quency band
Briefly press the adjustment knob
›››
Fig. 2
12
.
Manual frequency selection is also
closed if you select a station with a
memory button. If no operation is
performed, the frequency range
will disappear after a period of in-
activity.
Storing stations
Storing the
station that is
currently be-
ing listened to.
Press and hold the desired memo-
ry button
›››
Fig. 23 until an audi-
ble signal is heard.
The station tuned in will be stored
on this memory button.
Storing stations
Storing a sta-
tion on the list
of stations
Press the STATION LIST
›››
Fig. 23
function button to open the station
list.
The stations that are already stor-
ed on a memory button are
marked on the station list with the
symbol

›››
Fig. 24.
Select the desired station by
pressing and holding it on the
screen. A screen will appear to
store the station on the memory
buttons.
Press the memory button where
the station is to be stored.
An audible signal is heard and the
station is stored on the memory
button. To continue storing other
stations from the list, repeat the
process.
Deleting stor-
ed stations
All the stored stations can be de-
leted together or separately from
the
FM, AM, DAB Setup
menu
›››
page 36.
SCAN function
When the scan function is active, all available
stations on the current frequency band are
played in sequence for approximately 5 sec-
onds each.
»
35