Selco EB 70 - Chapter 2. Optionals; Rear Collet Stop for Pieces With Projecting Facings; Scoring Blade for Postformed Pieces; Cutting Area Laser


BIESSE S.p.A. Woodworking Machinery
(l128h025.fm-141101)
&KDSWHU 2SWLRQDOV
This chapter gives a brief description of all the optionals foreseen for the machine.
 5HDU&ROOHW6WRSIRU3LHFHV:LWK3URMHFWLQJ)DFLQJV
This type of stop is fitted in place of the stop
fitted on the basic version of the machine. It
allows the exact reference point of pieces with
projecting facings to be obtained.
 6FRULQJ%ODGHIRU3RVWIRUPHG3LHFHV
This is a scoring blade with a larger diameter than that of the scoring blade fitted to the basic
version of the machine. This blade obtains a better cut when machining postformed pieces.
 &XWWLQJ$UHD/DVHU
This is a device that projects a laser ray along the cutting line in order to check the exact point in
which the piece will be cut. This device is usually used to make oblique cuts without using the
stops.
rear collet stoppieces with projecting
facings