Selco EB 70 - Main Button Pad


BIESSE S.p.A. Woodworking Machinery
(l103h036.fm-141101)
&KDSWHU
&RQWUROVDQG6LJQDOOLQJ'HYLFHV
 0DLQ%XWWRQ3DG
The main button pad is equipped with a series of controls for the main machine operations.
%6WDUW%XWWRQJUHHQ: this is used to enable the supply of electric power to the
moving machine organs.
/LW= function enabled.
%6WRS%XWWRQEODFN: this is present when the machine is part of a line of
machines. DIfferently from the red mushroom button, which when pressed will stop
the entire line of machines, this button is used to stop this machine only.
%%ODGH6WDUW%XWWRQZKLWH: this is used to start the blades.
/LW= function enabled.
%%ODGH6WRS%XWWRQEODFN: this is used to stop the blades. In addition, the
same button is also used to stop the working cycle.
%%ODGH&KDQJH6HOHFWRUNH\: this is used to check and/or replace blades.
5LJKW = function enabled.
%:RUNLQJ&\FOH6WDUW%XWWRQZKLWH: this is used to start the working cycle.
/LW= function enabled.
%:RUNLQJ&\FOH6XVSHQVLRQ%XWWRQEODFN: this is used to suspend working
cycles.
%3XVKLQJ'HYLFH6HOHFWRU\HOORZ: this is used to suspend pushing device
forward and back strokes.
5LJKW = function enabled.
/LW = indicates that the pushing device has suspended its movements and that the
blade access hatch is released.
%&XWWLQJ$UHD/DVHU6HOHFWRUEODFN: this is used to switch on the laser device
situated in the cutting area.
5LJKW= function enabled.
%&ROOHW3UHVVXUH6HOHFWRUEODFN: this is used to set the working pressure of
the collets on the rear stops.
/HIW = high pressure.
5LJKW = low pressure.
01
0
1
LO
HI