$
$SSHQGL[$
6DIHW\LQIRUPDWLRQ
BIESSE S.p.A. Woodworking Machinery
(l109h012.fm-141101)
14. In case of lubricant overflowing, clean the place by sprinkling sand on the surfaces. Then
remove the sand with a spatula and dispose of it for incineration at duly authorized Special
Waste Disposal Centers.
Wash surfaces with solvents (chlorinated or aliphatic) taking care that the fumes are not
allowed to accumulate in the working area.
15. Those who are particularly sensitive to lubricants may be subject to an allergic reaction or
oil-related acne, particularly if their skin has previously been subjected to damage by abrasive
substances (cleaning paste or injuries) or chemicals (solvents, extremely alkaline detergents,
etc.). Irritations may result from contact with the eyes.
16. Incorrect handling of lubricants may result in overexposure, for example slight irritation of the
eyes or skin; if this occurs, move away from the site of exposure and call a doctor.
17. Should lubricants come into contact with the skin, wash well with soap and water.
18. Should lubricants come into contact with the eyes, rinse well with water only.
19. If a lubricant in the “oils” category is swallowed, do not induce vomiting and call a doctor
immediately.
20. If a small amount of lubricant in the “greases” category is swallowed, call a doctor
immediately. If the amount swallowed is larger, administer 1 or 2 glasses of water and call a
doctor immediately. Do not induce vomiting or administer anything orally if the person in
question has fainted.
$ 'HPROLWLRQ
1. All operations must be carried out by qualified personnel only.
2. Turn the machine off, disconnect it from the power supply and discharge all the air from the
pneumatic system.
3. Remove any tools that may still be installed and put them away.
4. Fix all parts capable of moving by inertia or by gravity.
To Next Page
Loading...