Selco EB 70 - General Cleaning of the Machine


&KDSWHU
0DLQWHQDQFH
BIESSE S.p.A. Woodworking Machinery
(l107h050.fm-141101)
/RFDWLRQRI3RLQWV7KDW5HTXLUH0DLQWHQDQFH
 *HQHUDO&OHDQLQJRIWKH0DFKLQH
If the machine and the surrounding area are kept clean and tidy this will make the working area
safer and more healthy, and will enable commands and indications to be made easily and without
errors.
To remove any possible chips, use a vacuum cleaner; to remove any trace of small powders use a
compressor, always taking care to maintain a safety distance. The chips fallen on the ground must
be removed with a vacuum cleaner or with a broom, since the ground might be slippery.
To clean the guides or the racks, it is recommended to use a clean and dry cloth. In case of
incrustations, it is recommended to use a scrubbing brush with bronze bristles. Subsequently use
a long handled brush to lay a thin layer of MOBILUX EP0 lubricant.
$
%
&
'
'
)
*
&
&
(