$
BIESSE S.p.A. Woodworking Machinery
(l109h012.fm-141101)
$SSHQGL[$ 6DIHW\LQIRUPDWLRQ
The machine will operate in safety if it is used by qualified personnel in compliance with the
recommendations and instructions provided in this manual or supplied by BIESSE’s technical
engineers at the time of installation. BIESSE declines all responsibility for any damage to persons
or goods resulting from use of the machine by unqualified operators or from failure to observe the
following recommendations.
Never remove or tamper with guards and protections in order to carry out unforeseen operations,
as this will result in serious risks for the operator. BIESSE declines all responsibility for damage to
persons or goods resulting from incorrect use or deliberate misuse of the machine.
$ 7UDQVSRUWDQGPRYLQJ
1. When lifting and moving the machine, either as a whole or in part, operations must always be
carried out by suitably qualified and experienced personnel, using lifting devices with an
adequate capacity.
2. Never stand within range of the crane when the machine is being lifted.
3. Only lift the machine as described in this manual.
$ ,QVWDOODWLRQ
1. Installation operations must always be carried out by qualified personnel who have been
authorised to do so by BIESSE.
2. Before starting work, check that the various parts of the machine are free from any physical
damage caused by bumping, tearing or abrasion. Damage to electrical cables or sheathing
will compromise the safety of the machine’s electrical system.
$ 7RROV
When choosing tools to be installed in the machine, the operator is advised to follow the
recommendations given below.
1. Never use deformed or cracked rotating tools.
To Next Page
Loading...