Selco EB 70 - Noise Level; Dust Emission

%
BIESSE S.p.A. Woodworking Machinery
(l110h046.fm-141101)
$SSHQGL[%
7HFKQLFDO&KDUDFWHULVWLFV
% 1RLVH/HYHO
Sound pressure data are as follows:
Tests were carried out in accordance with ISO 3746 and ISO 11202 Regulations.
The noise levels given here are emission levels and do not necessarily represent safe working
levels. In spite of the existence of a relationship between emission levels and exposure levels, this
cannot be used reliably to establish whether or not other precautions are necessary. The factors
that determine the levels to which the workforce is exposed include: the length of the exposure, the
characteristics of the workplace environment, other sources of dust, noise, etc.; that is, the number
of machines and other processes in adjacent areas. In any case, this information allows the
machine user to be able to carry out a better evaluation of risks or danger.
% 'XVW(PLVVLRQ
The machine has passed the test for dust emission from woodworking machinery. This test is
carried out in accordance with the standard DIN 33893. The amount of dust issued into the
environment was less than 2 mg/m
3
. The certificate was issued by the FPH body on 10-09-2001
(reference FPH-AZ 010/2001).
Equivalent sound pressure level in position in the work area during
machining (L
pA
)
dB(A) 79.1
Environmental correction factor (K) dB(A) 1.4
Sound power level during machining
(L
wA
)
(wA)
dB(A)
mW
98.6
7.2
Weighted peak instantaneous sound pressure in the work area
during machining
dB(C) 104<130